The Gallegos Corporation Masonry Unit - Journeyman in Big Sky, Montana
A Mason Journeyman must be able to work with brick, block and/or stone completing custom work on distinctive projects. Journeyman masons need to have above average skill and speed in laying brick, block and/or stone. A Mason is required to complete work safely, with quality and within productivity specifications as directed by the foreman or superintendent.
Participate and collaborate with the crew during daily huddle to ensure safety, quality and productivity goals are set.
Ensures proper installation of wall ties, flashings and laps of paper to job specific standards.
Measure distance from reference points and mark guidelines to lay out work, using plumb bobs and levels.
Shapes brick, block, or stone in preparation for final setting with use of chisels and/or power saws.
Spreads mortar along mortar guides to ensure joints of uniform thickness.
Spreads mortar over brick, block, or stone and foundation with trowel and sets masonry in place by hand or with aid of a forklift or a crane.
Aligns brick, block, or stone with plumbline and finishes joints with pointing trowel.
Fasten or fuse brick or other building material to structure with wire clamps, anchor holes, torch, or cement.
Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.
Construct corners by fastening in plumb position a corner pole or building a corner pyramid of bricks and filling in between the corners using a line from corner to corner to guide each course, or layer, of brick.
Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.
Other duties as assigned by the Foreman or Superintendent.
5 plus years of equivalent work experience
Attention to detail with demonstrated accuracy and thoroughness
Conserves materials and meets productivity set forth by supervisors
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to:
moving mechanical parts/equipment such as saws, forklifts and vehicles
outdoor weather conditions including extreme heat or cold weather
work in high, precarious places such as scaffolding and ladders
fumes or airborne particles, toxic or caustic chemicals
risk of electrical shock
weight of heavy material, such as stone, brick or block
the noise level in the work environment is usually loud.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must regularly lift and /or move up to 100 pounds and occasionally lift and/or move up to 120 pounds. Specific vision abilities required by this job include depth perception. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel in a repetitive motion; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl, including working on hands and knees for extended periods of time. The employee is frequently required to walk and talk or hear. The employee is occasionally required to sit.
EOE Minorities / Females / Protected Veterans / Disabled